Well its really been a loooonnngg time since i posted on this blog!! argh i let it go too long now, so I will finally update it!!!
So far this year there has been a lot hapening.
Over the summer I (bartos) came across 2 huge compaq servers that are now set up to run a active direcotry, DNS, and File server. now we just need some internet so we can update the damn things.
Our first meeting was our old mebers only meeting, we voted on a president and came up with some new possitions. The results of the election were, President: Eric Bartos Vice President: Andrew (new position) Web master/programer: Mark.
after our election we had the new members meeting, it went like usual with dry ice root beer and a tour of the telescope and all of our rooms.
The next major mark in the year was reciving our new new LNA, replacing the one that got destroyed by rain last year. Along with the LNA came the new spectra cyber program that is like a million times better than the origonal one, but still not the best thing ive ever seen. this basically brings us up to this last week. last week was intresting, we fixed a few issues with the telescope. Along with that we put the front end up, and now we are waiting on a cable from jack so we can put the new LNA up. so this weeks jobs are to
A) get new guy wiers made and put up
B) configure the computer to allow remote desktop
C) put up the front end cable/LNA
D) clean up the RATz room
E) test and configure the motors with scope 2
F) test and configure the radio
G) ...SCAN?????????...
Thursday, November 11, 2010
Tuesday, September 22, 2009
Welcome 2009 new members!
Welcome Back to school everybody!! This is the GP RATz blog! For those of you who don't know we are the Grosse Pointe Radio Astronomy Team. We are the only group of students that built a radio telescope from scratch. if you are new to radio astronomy take a look at the National Radio Astronomy Observatory's (NRAO) information on radio astronomy at: http://www.nrao.edu/whatisra/index.shtml also take a look around the site.
This will keep you informed of all the recent events in the club if you are in the club, this is really for you if you aren't in the club, but go to Grosse Pointe North or South High School you can come to the new members meeting, check the school announcements for more information.
And for even more information you can check out our web site at gpratz.org and go join the forum over at forum.gpratz.org.
We have already chosen our officers this year. they are, President: Bartos, Co VP: Miller and Co VP: Bakowski.
That's all for now but take come back!! The blog will be updated Every Thursday, if not Thursday it will be on Friday.
Hope to see you all this thursday at the new members meeting
Cheers
E. Bartos, Tech Guy.
This will keep you informed of all the recent events in the club if you are in the club, this is really for you if you aren't in the club, but go to Grosse Pointe North or South High School you can come to the new members meeting, check the school announcements for more information.
And for even more information you can check out our web site at gpratz.org and go join the forum over at forum.gpratz.org.
We have already chosen our officers this year. they are, President: Bartos, Co VP: Miller and Co VP: Bakowski.
That's all for now but take come back!! The blog will be updated Every Thursday, if not Thursday it will be on Friday.
Hope to see you all this thursday at the new members meeting
Cheers
E. Bartos, Tech Guy.
Thursday, September 3, 2009
Project update #1
Hello again! Its Thursday, and the first RATz meeting (returning members only) is in one week!!!
anyways, registration went good we had about 13 total people sign up. thats all thats new with the whole club, but the research project is getting along in the early stages nicely! Until yesterday i could not test the parts due to the fact that we being RATz are always doing things that involve COM/serial ports...well i dont have any of those, and until i got one i only knew that the kits would turn on and i could get a signal. Well now that i was able to get into school/the RATz room i haz a COM port! last night i ran the first 24 hour test with all the sensors connected to the master hub, so far i have found out that with the current power situation my temp/humidity sensor is a bit sketchy, meaning it is dropping out every time its capacitors run out of charge. this only happens because the current program i am using scans the channels on the master hub rather than leaving all of em on taking up major bandwidth that the network cannot handle. That just means i have to power cycle the hub every 2 min. Once i got past that problem, i got around to finding a good program that will work for just logging until we can actually get our real program written and find a programmer. Until we get the program made it will take a TON of work to manually remove all the spikes and equalize the curve of the temperature in the scan. For now we will just have to plan out, and work out the formula that the program will need to use, also figure out how the hell the logging program is saving the files so we can compare everything and try to get a general idea on how it should work and what elements we need to put into the program itself. We will also need to get a idea of how the Spectra Cyber works with the computer so we can actually make a decent interface to replace the current program and add in our own stuff. Tomorrow I am going to try to plan the first official meeting to get all our stuff together and all our ideas down on paper. so until then thats all!
Cheers
-Barts
anyways, registration went good we had about 13 total people sign up. thats all thats new with the whole club, but the research project is getting along in the early stages nicely! Until yesterday i could not test the parts due to the fact that we being RATz are always doing things that involve COM/serial ports...well i dont have any of those, and until i got one i only knew that the kits would turn on and i could get a signal. Well now that i was able to get into school/the RATz room i haz a COM port! last night i ran the first 24 hour test with all the sensors connected to the master hub, so far i have found out that with the current power situation my temp/humidity sensor is a bit sketchy, meaning it is dropping out every time its capacitors run out of charge. this only happens because the current program i am using scans the channels on the master hub rather than leaving all of em on taking up major bandwidth that the network cannot handle. That just means i have to power cycle the hub every 2 min. Once i got past that problem, i got around to finding a good program that will work for just logging until we can actually get our real program written and find a programmer. Until we get the program made it will take a TON of work to manually remove all the spikes and equalize the curve of the temperature in the scan. For now we will just have to plan out, and work out the formula that the program will need to use, also figure out how the hell the logging program is saving the files so we can compare everything and try to get a general idea on how it should work and what elements we need to put into the program itself. We will also need to get a idea of how the Spectra Cyber works with the computer so we can actually make a decent interface to replace the current program and add in our own stuff. Tomorrow I am going to try to plan the first official meeting to get all our stuff together and all our ideas down on paper. so until then thats all!
Cheers
-Barts
Tuesday, August 25, 2009
Almost ready
Well hello all! I actually have some news to report on this week even thou its not Thursday and school hasn't even started I (Eric) have been working hard preparing plans and new parts for this year! first i will start off with the new parts because that is always more interesting than plans.
As some of you might know Kara and I with the help of a programer will be working on a reserch project this year. It basically involves how weather conditions effect our dish. To start this project off we had to find a simple way to mesure temperature on both the front end and back end, as an added bonus to that the place that i orded the 2 temp sensors also happend to have a lighting detector, this comes into effect by showing what spikes on the scan are from lightning and what ones are from interferance. eventually all the sensors will be working together in a single program that takes data from the SpectraCyber (our back end) and the weather sensors, once all the data is in the program it will hopefully be able to get rid of any curves or spikes that match up with the curves or spikes of the weather sensors. The only thing I have to do with the sensors now is to do a actuall test of the lightning sensor this involves me getting a part from the RATz room and i doubt that will happen very soon. Once i do get the part all i have to do is set everything up again and test it on my computer. (this uses com ports and i don't have any). So once i get that all tested and know how it works it will probably be just about time to start school. well that was the parts now for the plans...err well whats left of the plans.
Well like always i have some plans that might never end up happening since im not gonna type the whole thing out again, you should go visit the NEW forum at http://gpratz.org/forum also if you are/ were in RATz i want you to join, its very boring in there right now we need some people to get the discussion going!!! so anyways its under telescope discussion and then "interferometer" err something like that. and yep you guessed it the plan is for a second telescope. now before you call me crazy take a look at the forum and see my points!! i have good reasons for us to have an interferometer. also i am thinking we should put it over at South, just because that would give us a nice distance and give the people over at south a reason to join RATz. As of now that idea is still kinda in the works i will let everybody know when i have a full plan for it.
Thats all for now, and remember to check out the new web site at gpratz.org
Cheers
-Bartos
As some of you might know Kara and I with the help of a programer will be working on a reserch project this year. It basically involves how weather conditions effect our dish. To start this project off we had to find a simple way to mesure temperature on both the front end and back end, as an added bonus to that the place that i orded the 2 temp sensors also happend to have a lighting detector, this comes into effect by showing what spikes on the scan are from lightning and what ones are from interferance. eventually all the sensors will be working together in a single program that takes data from the SpectraCyber (our back end) and the weather sensors, once all the data is in the program it will hopefully be able to get rid of any curves or spikes that match up with the curves or spikes of the weather sensors. The only thing I have to do with the sensors now is to do a actuall test of the lightning sensor this involves me getting a part from the RATz room and i doubt that will happen very soon. Once i do get the part all i have to do is set everything up again and test it on my computer. (this uses com ports and i don't have any). So once i get that all tested and know how it works it will probably be just about time to start school. well that was the parts now for the plans...err well whats left of the plans.
Well like always i have some plans that might never end up happening since im not gonna type the whole thing out again, you should go visit the NEW forum at http://gpratz.org/forum also if you are/ were in RATz i want you to join, its very boring in there right now we need some people to get the discussion going!!! so anyways its under telescope discussion and then "interferometer" err something like that. and yep you guessed it the plan is for a second telescope. now before you call me crazy take a look at the forum and see my points!! i have good reasons for us to have an interferometer. also i am thinking we should put it over at South, just because that would give us a nice distance and give the people over at south a reason to join RATz. As of now that idea is still kinda in the works i will let everybody know when i have a full plan for it.
Thats all for now, and remember to check out the new web site at gpratz.org
Cheers
-Bartos
Thursday, July 30, 2009
Back at it already?
Hello everybody! hope your summer has been going good!! well i just want you all to know that i will be back to updating this blog again, this year it will be MUCH more active! (at least i hope) but we have a much better web "community" going on this year. Now that everything is run by me and hosted by Site5 we can have a unblocked forum and many other new and improved services, well now you may be wondering...well ware is all this??? all of our interwebz stuff is located at gpratz.org there you can click any link to take you to all of our major online services. i have attempted to move this blog over to wordpress hosted by me but nothing turned out the way i wanted it to, so we are still having our blog over here, and that is the way its gonna stay because i LOVE blogger so simple! anyways, i could go on forever about our new interwebz, but i wont. all i need you to know is the forum is still under construction because we are now hosting it our self rather than on that shitty site we had it on before. (could anybody stand that site???) our new forum is at gpratz.org/forum all you have to do is register, just not yet. i will let you know over here when you can. so other than that nothing major has happend over the summer in RATz news. althogh i am gonna start doing some research on plan "002" some of you might know what im talking about but if you do DON'T TELL ANYBODY! i need to do work and finish the plan before i present it to the club. OH OH i just remembered! RATz now has a more official phone number thanks to google voice!!! this is the best number ever, but even better than the number is the fact that it will ring in the RATz room!! more to come on that, i can go on about that forever. the number is (313) 473-RATZ that is the best nuber ever!! anyways i have much more i can talk about with all our online shit but i have already gone on enough but one last thing is along with our new site and hosting we have email provided by google apps! (i fu**** love google) well other than that im not goin on any more. thats all for now, im actually gonna try to update this every Thursday even if we don't do anything and if we do stuff on other days i will post then too so yeah. that's all.
E. Bartos, Tech Guy.
E. Bartos, Tech Guy.
Monday, May 25, 2009
THE GPT LIVES!!!!
Well after a very long year of work on the motors and waiting for parts, we actually got everything working the way it should!!!!! We got everything up in to coffin 3 weeks after NRAO and it all works!!! as of now we can control the motors from the control room along with the NEW thats right NEW back end that is now all computer controlled. over the long weekend we for the first time let the telescop point at the sun's transit for the entier weeked without securing it....hope that was a good dicision. we also have been doing some week long scans for the past 2 weeks, now that produced alot of data files, but thanks to ulmer we now have a simple program to combine all the files. other than that we will have to take some of the stuff out of the coffin because unfortunatly this thursday is our last meeting. thats all for now!
Friday, May 8, 2009
Very Important News
IT’S FINNALLY WORKING!!!!!!!! yes some time last night we got the telescope to do what we wanted it to do all along so the motors and the spectral line are working at the same time so... ya we might do some tweaking (probably shouldn’t), and some other tests to make sure that it works. We have not had first light yet but it might be soon!!!!!!
Subscribe to:
Posts (Atom)